AllPondSolutions

These external use protein skimmers are for use outside of your aquarium using external pipework to move the water back and forward from your aquarium fish tank and come complete with an advanced needle wheel pump. A venturi valve attached to the pump is used to inject air into the water flow, the water is then drawn through the needle wheel impeller, which chops the incoming bubbles into a fine mist by hacking through the water air mixture and eventually creating a foam at the top of the skimmer collection cup area.

The Marine-Sources advanced double reaction chamber is designed to make the bubbles spread evenly over the upside reaction chamber and prolong the contact time between the bubbles and water. The lotus root-shape funnel has a special design which can make the bubbles much richer, thereby increasing the overall performance of the skimmer.

A feeder pump as well as inlet and outlet pipe work is required to install these external use protein skimmers in line with your marine aquarium set up. The suggested feeder pump for use with your aquarium / skimmer should be decided by the total litres of water in your aquarium fish tank. The water pump flow rate should be 1.5~3 times the total amount of litres. For example; if your aquarium holds 500 litres of water a good feeder pump to use with this aquarium will have a flow rate of around 750~1500 litres per hour. Please note feeder pump and pipework not included.

 Features

 Marine-Sources advanced double reaction chamber is designed to make the
 bubbles spread evenly over the upside reaction chamber and prolong the
 contact time between the bubbles and water.
 The lotus root-shape funnel has a special design which can make the bubbles
 much richer, thereby increasing the overall performance of the skimmer.
 Needle-wheel system with venturi enables the included specially designed
 pump to mix air and water into very fine micro bubbles
 Venturi air intake designed to not only increase the skimmer air intake volume
 but enhance the skimmers bubble producing efficiency.
 Dual Intake inlets for maximum skimming efficiency.
 Smooth-twist removable collection cup for quick and effortless cleaning.
 Made with top quality cast acrylic, which means these skimmers are ozone friendly.
 Air intake silencer for each needle wheel pump included.

 Specification

 Model no. MSA4006
 Skimmer type: Aquarium Professional External Use
 Pump: 6 x HX-6540 / 33w
 Max tank volume: 10000 Litres
 Water inlet: 32mm
 Water outlet: 50mm
 Dimensions (diameter x height): 400 x 1000 mm
 Foot print: 640 x 700 mm
 Feeder pump and outlet piping required (not included)
 12 months warranty